-
Cutting &
Compact Chop Saw
Compact Chop Saw is a subsea cutting tool for use in subsea structure removal or repair operations.
It has been developed to cut pipelines, stud bolts, chains, wire rops, jackets, guide posts, drill strings and tubing/structures. The Chop Saw comes with clamp-on functions used to keep the tool in ridget position during cutting. A flow control valve is used to adjust cutting speed on both feed cylinder and rotation of the cutting blade. In order to protect the cutting disc a pressure relief valve in installed on feed cylinder.
-
Cutting &
Diamond Wire Saw 0-320 MM
Manipulator held utility saw with long track record.
Diamond Wire Saw with a range up to 320mm. Within capacity for most Work Class ROV’s. Track record after years of use in the North Sea. The saw is designed to cut steel pipes, steel profiles and wires.
-
Cutting &
Diamond Wire Saw 630 MM
Unique and compact subsea Diamond Wire Saw with a range up to Ø630 mm OD pipe.
Within capacity for most Work Class ROV’s. To universal cutting operations with exceptional performance and long service life. Standard wires to be supplied with the saw are diamond wire for steel and diamond wire for concrete. Claws can be replaced if specific interface is required.
-
Cutting &
Diamond Wire Saw 770 MM
Unique and compact subsea Diamond Wire Saw with a range up to Ø770 mm OD pipe.
Within capacity for most Work Class ROV’s. To universal cutting operations with exceptional performance and long service life. Standard wires to be supplied with the saw are diamond wire for steel and diamond wire for concrete. Claws can be replaced if specific interface is required.
-
Cutting &
GR29 UW Grinder
-
Cutting &
J-TUBE Diaphragm Cutting Tool
This J-Tube Diaphragm Cutting tool is designed and built to be easily handled by standard ROV manipulators for cutting of reinforced rubber diaphragms.
The ROV friendly tool are primarily designed with aluminum and POM material to keep low weight in water. Tool body works as a guiding frame inside the J-Tube Bellmouth. POM material are used for protection of the Bellmouth due to scrapes and damages of surface and painting. The tool is manual rotated by the ROV manipulator by rotating the center D-handle of the tool. A hydraulic motor / bearing house, shaft and modified drill bit are used to drill hole in diaphragms and mill out the pieces without damaging inside surface of the Bellmouth.
-
Cutting &
ROV Grinder Ø350
The Ø350 Grinder is a compact tool, designed for use by standard ROV.
It is primarily used for cutting operations, but can also be fitted with a variety of suitable grinding, abrasive and polishing discs. A well-proven cutter / grinder which can be fitted with various cutting discs:
• Dual abrasive disc
• Steel abrasive disc
• Diamond abrasive disc -
Cutting &
ROV Knife
The J1W ROV Knife has been designed for cutting soft materials including webbing slings, fishing nets, cables, and fiber rope.
This tool can serve as an alternative to a hydraulic Softline cutter.
Available for both sale and rental.
-
Cutting &
SCU Cutter 181 Mm
Scissor Cutter Tool is designed to be used on an ROV by using a rugged fishtail handle and operated with the hydraulic pressure. It comes with an integrated pressure intensifier.
Applications:
– Rod material
– Tubes
– Profiles
– Frames
– Cables
– Small steel wires up to Ø20*
– Decommissioning -
Cutting &
SL55 Softline Cutter
SL55 Softline Cutter is a highly efficient cutting tool for soft lines and fibre rope materials.
Our SL55 – Softline Cutter is a quick and efficient tool for cutting soft lines and fibre ropes. Designed for use with ROV or diver operations.
-
Cutting &
SL80 Softline Cutter
The SL-80 cutter is a heavy-duty hydraulically operated soft and fibre line cutting tool.
The open sided design allows for easy positioning on the line by ROV or diver and simple operation. -
Cutting &
Subsea Drill 10-100 MM
Subsea drill designed to drill desired holes in pipe or profiles.
The tool can be modified to fit different interfaces and it can be equipped with various drill and hole bits. The tool can be hydraulic operated by standard workclass ROV. Compact and low-weight design makes the tool very ROV friendly.
-
Cutting &
Subsea Saw 15-90 MM
Manipulator held utility saw with long track record.
Subsea Saw with a range up to 90mm. Within capacity for most Work Class ROV’s. Track record after years of use in the North Sea. The saw is designed to cut steel pipes, steel profiles and wires. Standard blades to be supplied with saw are carbide and diamond types. Claws can be replaced if specific interface is required.
-
Cutting &
Subsea Saw 60-200 MM
Manipulator held utility saw with long track record.
Subsea Saw with a range up to 200mm. Within capacity for most Work Class ROV’s. Track record after years of use in the North Sea. The saw is designed to cut steel pipes, steel profiles and wires. Standard blades to be supplied with saw are carbide and diamond types. Claws can be replaced if specific interface is required.
-
Cutting &
Wire Rope Cutter RCV155
The RCV155 is a heavy-duty wire rope cutter designed for use in severe working conditions and can be used at any water depth.
The integrated hydraulic anvil removes the need for diver intervention and makes the tool easily deployed and operated by ROV, as safety is paramount.
-
Cutting &
Wire Rope Cutter RCV75HD
The RCV75HD is a heavy-duty wire rope cutter designed for use in severe working conditions and can be used at any water depth.
With integrated interlock it will ensure that the blade cannot activate until the anvil is fully deployed.
-
Cutting &
Wire Rope Cutter WCOS38DLP
This rope cutter may be used on alternative materials, such as electrical power or communication cables, again to a maximum of 38mm diameter.
Menu
J1W Ltd
Unit 10 Greenrole Trading Estate
Howe Moss Drive
Dyce
Aberdeen
AB21 0GL
Vat Number: 398 1430 71
Company Number: 633084
