-
Torque Tools
Clutch Tool Paddle/17D 40-100NM 80-200NM
The Clutch Tool has been designed to allow the manipulator to operate low torque valves without the need for a hydraulic/electric torque tool. The Clutch Tool assembly limits the torque that can be applied to the valve stem from the ROV manipulator, ensuring damage to the valve does not occur. Supplied with 40-100NM and 80-200NM SS Clutch assemblies the operator can quickly and easily set the tool to the required max torque prior to deployment.
-
Torque Tools
Electric Torque Tool Class 1-4
The Electric Torque Tool is a module based, compact, flexible and robust precision tool for operation and use in all subsea and ROV applications. Delivered with the new generation software control system (iCsys Suite) for maximum utilization.
The Blue Logic produced system combines all known advantages from a hydraulic torque tool system with the technology and advantages available from a modern servo based electrical controlled drive system. Interface sockets are replaceable on both deck and subsea (optional) to interface ISO Class 1-4 interfaces. The different sockets will automatically interface the gear system to utilise the optimal gear ration and power/speed capacity. The control system automatically detects socket and gear ratio and will automatically switch between low torque and high torque mode.
-
Torque Tools
Flying Lead Orientation Tool
FLOT is designed to operate as a ROV mounted simplification tool to allow heavy applications such as torque tools, MQC plate and Flying Leads to be operated by ROV.
The Flying Lead Orientation Tool, or FLOT, is designed and built for ease of operation and maintenance. The tool allows for angular and rotational orientation of a Class 4 torque tool to aid in connection of flying leads subsea.
-
Torque Tools
Manipulator Torque Multiplier Tool
Located on subsea structures and tooling all over the world, there are needle valves or other valves that are sensitive to over torque.
To prevent damaging valves by over torque, Envirex have designed a ROV manip. operated torque tool for such applications. The tool can be adjusted to a maximum output torque setting to avoid damaging subsea valves caused by over torque. The torque limiter is highly accurate for both clockwise and counter clockwise turns.
-
Torque Tools
ROV / DIVER Torque Multiplier GEN-2
The Torque Multiplier Tool Gen-2 is a compact and ROV friendly multiclass torque tool designed for operating Class 1-4 subsea valves and MQC plates up to 1200 Nm torque applications.
The Torque Multiplier Tool (TMT) is a fully mechanical ROV manipulator/diver torque tool that require no hydraulic or electric power- and communication. Reducing the risk of hydraulic fluid spill, hose management and electrical cables. The tool comes with a mechanical latch system for standard API 17D bucket. Torque & Turns display is powered by batteries and is turned on/off or reset using flashing illumination. The Torque Setting System (calibration/operation) enables the operator to both adjust and verify torque output when subsea. The Torque Multiplier Tool has a built-in memory function that enables logging of valve operations when required. The logging files is transferred to laptop through USB adaptor cable. Other end effector available upon request (paddle valves)
-
Torque Tools
Test Jig Class 1-4 Transducer System
The Class 1-4 Test Jig is a Norbar designed torque verification unit.
This unit is used to give pre-dive surface confirmation of the torque tool calibration. It consists of a standard ISO class 1-4 torque reaction bucket with study base and built-in torque sensor. The Test Jig Transducer system is delivered as a complete kit. (Instrument / Load cell + Test Jig). The verification unit are calibrated once a year. The accuracy is class one. (+/-0,5% of reading from 20 to 100% of full scale).
-
Torque Tools
Test Jig Class 6-7 Transducer System
The Class 6-7 Test Jig is a Norbar designed torque verification unit.
This unit is used to give pre-dive surface confirmation of the torque tool calibration. It consists of a standard ISO class 6-7 torque reaction bucket with study base and built-in torque sensor. The Test Jig Transducer system is delivered as a complete kit. (Instrument / Load cell + Test Jig). The verification unit are calibrated once a year. The accuracy is class one (+/-0,5% of reading from 20 to 100% of full scale).
-
Torque Tools
Torque Gearbox Class 6-7
The Class 6-7 Gearbox is designed to enable operation of Class 6 and Class 7 interfaces using a Class 4 torque tool for maximum flexibility at minimum cost.
The Gearbox can be configured for both shortand long Class 7 interface, in addtion to Class 6 using a square insert. The Gearbox is delivered as a complete kit including required components to adapt the tool to the interfaces as described above. Maximum outpuit is 40 kNm.
-
Torque Tools
Torque Limiter Tool
Located on subsea structures and tooling all over the world, there are needle valves or other valves that are sensitive to over torque.
To prevent damaging valves by over torque, Envirex have designed a ROV manip. operated torque tool for such applications. The tool can be adjusted to a maximum output torque setting to avoid damaging subsea valves caused by over torque. The torque limiter is highly accurate for both clockwise and counter clockwise turns.
-
Torque Tools
Torque Tool Class 1-4 Feedback
The hydraulic Class 1-4 feedback torque tool has been designed in tradition of providing our customers a simple, rugged and reliable product.
The feedback Class 1-4 Torque Tool comes with an integral torque and turns display for visual read-out of torque and turns feedback. The display does also have a memory recording date, time, torque and turns to be used as documentation for the valve operation (optional). The Torque Tool can be supplied with a surface Test Jig for calibration prior to subsea operation. The read-out unit provides a torque display in either Nm or ft-lbs
-
Torque Tools
Torque Tool Class 1-4 Standard
The hydraulic Class 1-4 torque tool has been designed in tradition of providing our customers a simple, rugged and reliable product.
The standard Class 1-4 Torque Tool comes with an integral turns display counter for visual read-out of turns feedback. The Torque Tool can be supplied with a surface Test Jig for calibration prior to subsea operation. The read-out unit provides a torque display in either Nm or ft-lbs.
-
Torque Tools
Torque Tool Class 6-7 Feedback
The hydraulic Class 6-7 torque tool has been designed in tradition of providing our customers a simple, rugged and reliable product.
The torque tool give the operator full control on torque and turns, allowing the operator to set correct torque and turns to avoid over torqueof the object. Subsea display shows exact torque and turn feedback with an accuracy of +/- 3,5% at max torque. Display data can be transferred visually through the ROV camera or electronically through an additional control system to the operator.
-
Torque Tools
Torque Wrench Syclone 1
The Syclone 1 is a ROV operated torque tool with a lot of force. It can rotate both ways with high precision and speed.
Torque is fully adjustable and with a precision of ± 3%. Can be ordered with a standard reaction arm, or you can get one custom made.
-
Torque Tools
Torque Wrench Syclone 2
The Syclone 2 is a ROV operated torque tool with a lot of force. It can rotate both ways with high precision and speed.
Torque is fully adjustable and with a precision of ± 3%. Can be ordered with a standard reaction arm, or you can get one custom made. -
Torque Tools
Torque Wrench Syclone 3
ROV operated lightweight torque wrench tool for tightening or retrieval of bolts.
The torque wrench is a small, continuosly rotating torque tool with a lot of force. Rotate both directions with high precision and speed. Can be fitted with a wide range of bolt sockets. Comes with ROV fishtail handle as standard.